Connecting to PhotoPRINT Server / FlexiPRINT Server at an Internet Address

To connect to a copy of PhotoPRINT Server / FlexiPRINT Server running on a computer at a specified TCP/IP address:

1. Ensure that neither Production Manager nor PhotoPRINT Server / FlexiPRINT Server is running on your computer.
2. Make sure that Production Manager is not running on the remote computer.

   If Production Manager is running on the remote computer, the software will connect to that copy of Production Manager instead of PhotoPRINT Server / FlexiPRINT Server.

3. Find out the TCP/IP address of the remote computer.
   1. To determine the TCP/IP address of a Windows computer, from the command line type ipconfig and press Enter.

      Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : alias.com IP Address. . . . . . . . . . . . : 10.1.1.134 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.2

      [NEED TO UPDATE GRAPHIC TO SHOW BOTH IPv6 AND IPv4 ADDRESS LINES.]

4. Create your design in the design software.
5. On the Standard toolbar, click Cut/Plot or RIP and Print.
6. If the Select a Production Manager dialog box does not appear, select Other from the Setup List in the top-left corner.

   

7. Select On the internet address.
8. Enter the TCP/IP address of the remote computer.
9. Click OK.

   Once the software connects to PhotoPRINT Server / FlexiPRINT Server, it will automatically populate the Setup List with the available setups.