Applying Profile Fill

1. Select the desired objects.
2. From the Effects menu, point to Engraving and select Profile Fill.

   The Profile Fill tab appears in DesignCentral.

3. In DesignCentral, adjust the following parameters:

   	Selects a tool from the Tool Library. Select Edit from the bottom of the dropdown list to create a new tool or edit an existing one. (See Tool Library for more information.)
   	Online. Creates a tool path that directly follows the existing path. Use the Online path style for stroke fonts.
   	Inset. Creates a tool path that is set inside the existing path.
   	Offset. Creates a tool path that is set outside the existing path.
   	Online, Profile Fill		Inset, Profile Fill		Offset, Profile Fill
   	Specifies the distance between the existing path and the tool path (only available for Inset and Offset path styles).
   	Sharp corners. Causes the tool path to follow the object's corner.
   	Sharp Corners
   	1. Tool Path	2. Object		3. Tool Diameter		4. Engraving Tool
   	Round corners. Causes the tool path to curve around the object's corner.
   	Round Corners
   	Clipped corners. Causes the tool path to bevel around the object's corner.
   	Clipped Corners
   Round All	For all path styles, rounds off all of the object's corners so that objects can be inlaid.
   	Round All, Online		Round All, Inset		Round All, Offset

4. Click Apply.